How To Change Motorcycle Oil in 5 Easy Steps

A quick and easy guide on how to change your motorcycle oil in just 5 steps, complete with pictures and a video tutorial.

Checkout this video:

Supplies needed to change motorcycle oil

In order to change your motorcycle oil, you will need: a pan to catch the used oil, a filter wrench, rags, gloves, a funnel, and fresh motor oil. You will also need either a jack or a set of ramps to raise the front end of your bike so that you can drain the oil from the crankcase.

How to safely jack up your motorcycle

If you’re going to be changing your motorcycle’s oil, it’s important to know how to safely jack up your motorcycle first. Here are five easy steps to do just that:

1. Choose the right location. Make sure the ground is level and firm, and that there’s nothing nearby that could potentially fall on or roll over your motorcycle while it’s jacked up.

2. Park your motorcycle on its centerstand or side stand, whichever is appropriate for the type of motorcycle you have.

3. Place your jack under the bike. For most motorcycles, the best place to put the jack is under the engine, near the footrest on the right side of the bike. Consult your owner’s manual to be sure.

4. Start jacking up the bike until the tires are clear off the ground. You don’t need to jack it up too high, just high enough so that you can easily get to the oil drain plug and oil filter.

5. Once the bike is jacked up, place jack stands under each side of the frame to support it before you start working on changing the oil.

How to remove the oil drain plug

Most modern motorcycles have an oil drain plug located on the bottom of the engine. To remove it, you’ll need a wrench that fits the size of the plug. Once you have the wrench, simply turn the plug counterclockwise to loosen it. Once it’s loose, you can remove it by hand.

How to drain the oil

There are a few different ways that you can drain your motorcycle oil, but the most common and easiest method is to use a drain pan. You’ll want to place the pan underneath the oil drain plug, which is usually located on the bottom of the engine. Once the pan is in place, simply remove the drain plug and allow the oil to drain into the pan.

How to replace the oil filter

If you’re a motorcycle owner, it’s important to know how to change your own oil. Not only will this save you money, but it’s also a good way to ensure that your bike is always in good condition. With that in mind, here are five easy steps to changing your motorcycle oil:

1. Park your bike on a level surface and put down some newspapers or a sheet to catch any dripping oil.

2. Warm up the engine for a few minutes to help the oil flow more easily.

3. Place an oil drip pan under the drain plug and remove the plug with a wrench. Allow the old oil to drain out completely.

4. Replace the drain plug and tight it with a wrench.

5. Remove the old oil filter and replace it with a new one. Be sure to tight it securely with a wrench.

How to add new oil

If your bike is due for an oil change, it’s important to do it yourself to save money. Fortunately, changing motorcycle oil is a simple process that only takes a few minutes. Here’s a step-by-step guide on how to do it.

What You’ll Need:
-Motorcycle oil
-Funnel
-Drain pan
-Ratchet and socket
-Wrench (if applicable)
-Clean rags
Step 1: Warm up the Engine
steps 2 -5

How to properly dispose of used oil

You should never dispose of used oil by pouring it down the drain, on the ground, or in the sewer. Used oil can pollute our drinking water, contaminate soil, and harm wildlife.

There are three main ways to dispose of used oil:

-Take it to a service station or automotive store that accepts used oil. Many will take it for free.
-Take it to a hazardous waste collection site. Contact your municipality to find out where the nearest site is located.
-Recycle it yourself. You can recycle used oil into fuel oil, lubricating grease, or asphalt patches.

How to lower your motorcycle

motorcycles are typically lowered one of two ways, by adjusting the suspension or by changing out the fork tubes. Suspension lowering kits are available for most models and work by replacing the standard springs with shorter ones, or by installing useage devices such as air shocks which can be adjusted to different settings. Lowering the forks is accomplished by physically removing material from the bottom of the tubes so they are shorter, and consequently lower the front end of the motorcycle.

How to dispose of your used oil filter

It’s just as important to properly dispose of your used oil and oil filter as it is to change the oil in the first place. Improperly disposed of used motor oil and filters can pollute the environment, so it’s important to find a local recycling center that accepts them.

Here are a few tips on how to properly dispose of your used motorcycle oil and filter:

1. Find a local recycling center that accepts used motor oil and filters.
2. If possible, drain the oil from the filter into a clean container before disposing of it.
3. Never pour used motor oil or oil filters down the drain!
4. Once the used oil and filter are disposed of properly, be sure to wash your hands thoroughly with soap and water.

How to properly dispose of used oil

You’ve finally done it. You took the plunge and decided to change your own motorcycle oil. Kudos to you! Not only will you save some money, but you’ll also get a deeper understanding of how your bike works. But once the job is done, what do you do with the used oil? Improperly disposing of used oil is not only bad for the environment, but it can also be illegal in some states. So before you pour it down the drain or throw it in the trash, take a look at these five easy steps for properly disposing of used motorcycle oil.

1. Recycle It
The simplest and most environmentally-friendly way to dispose of used motorcycle oil is to recycle it. Just about every town or city has an oil recycling center where you can take your used oil to be properly disposed of. And many auto parts stores will also accept used motor oil for recycling. Be sure to call ahead and ask before you make the trip, as some stores have specific requirements for recycling used oil (like bringing it in a sealed container).

2. Re-use It
If you’re mechanically inclined, you can re-use your used motorcycle oil to lubricate other parts on your bike or in your garage. Just be sure not to use it on anything that will come into contact with food or skin (like chain saws), as motor oil can be poisonous if ingested.

3. Burn It
Believe it or not, burning motorcycle oil can actually be a good way to dispose of it – as long as you do it correctly. Used motor oil can be burned in special furnaces called “incinerators” that are designed for burning hazardous wastes like motor oil. But unless you have one of these furnaces, burning motor oil is probably not a good idea. Improperly burning motor oil can release toxic fumes into the air and contaminate the ground nearby.

4. Throw It Out
If recycling or re-using your used motorbike oil isn’t an option, then your next best bet is to simply throw it out – but again, there are some specific requirements for doing this correctly. Used motor oil must be disposed of at a hazardous waste disposal site; it cannot simply be thrown in the trash like other kinds of waste Oil disposal sites are usually located at landfill facilities or transfer stations operated by your town or city government. Once again, call ahead to find out the specific requirements for disposing of used motorbike oil in your area.

5. Hire a Professional
If all this talk about properly disposing of used motorbike sounds like too much work, then you can always hire a professional to do it for you Many bike shops and automotive service businesses will gladly take your used engine off your hands – just make sure they dispose of it properly!